Skip to content
Deck Railing Toronto logo

Aluminum railing cost in Toronto

Updated June 2026 — prices reviewed quarterly

Aluminum picket railings cost from $85 per linear foot installed in Toronto and the East GTA in 2026 — the most affordable of our three systems. A 40-foot deck run calculates around $3,285–$4,015 installed before any old railing removal. These are published rates, not averages scraped from the internet.

Published price inputs

  • Starting rate: $85/linear ft installed.
  • Old railing removal: +$5/linear ft.

Example ranges (illustrative)

Planning ranges for common layouts — not quotes, not past jobs.

ScenarioEstimated range
15 ft porch, straight$1,373 – $1,678
25 ft porch + steps, old iron removed$2,250 – $2,750
40 ft deck, straight$3,285 – $4,015
50 ft walkout deck, old railing removed$4,275 – $5,225

What moves an aluminum quote

Layout is the big one — raked stair rails, extra landings, and more posts take fabrication and install time. Removal and disposal of old iron or wood adds $5/ft. Anchoring conditions matter too: sound concrete is quick, crumbling concrete around rusted old posts needs prep, and stone caps need care. Decorative picket patterns (spindles, circles) add modestly over straight pickets.

Full system details on the aluminum railings page. Wondering whether to stretch for glass? The glass vs aluminum comparison and the glass railing cost guide lay out the $20–$40/ft difference honestly. Fastest answer: text us photos and we'll quote both.

Instant railing installation estimate

No email, no phone number needed. Pick your options and get a range now.

Railing type
Removing an old railing?

Estimated railing installed price

$1,373$1,678

Send 2–3 photos and your approximate length — we'll reply with a real quote.

Ballpark only — final price after photos or on-site measure

Aluminum railing cost questions

Is $85/ft really the installed price?

Yes — measure, fabrication, powder-coated aluminum posts, rails and pickets, anchors, and installation. Removal or site conditions move it from there.

Why do small porch jobs cost more per foot?

Short runs still need measuring, fabrication setup, travel, and careful anchoring. That fixed work is why the per-foot average is higher on a small porch than on a long deck.

How does aluminum compare with wood on cost?

Wood is cheaper on day one and more expensive every year after — staining, fastener tightening, and eventual rot. Aluminum's powder coat needs nothing. Over ten years, aluminum usually wins on total cost. We don't install wood railings.

What about wrought iron repair instead of replacing?

Welding and repainting rusted iron buys a few seasons at most, because corrosion restarts at the anchor points. Replacement with aluminum is usually the better spend — and we'll say so honestly if your iron still has life in it.

Get a firm aluminum railing number

Call and we'll set up your free quote — or text a photo of your stairs, porch, or deck for a fast number.

No deposit necessary · Fully insured & WSIB covered · 5-year workmanship warranty

Call NowText a Photo